97午夜理论片影院在线无码,中文字幕精品久久久久

Lift-and-sway type

Ordering Hotline：
Mr Lei    15817842088? ? Mr Cao 15899819318
Mr Chen 13790083198? ? Mr lü     13420665088
Ms Yao 15019622678? ? Ms Li    13600326220

1. The system is a combination mechanism of up and down reciprocating movement of the output shaft and intermittent division of left-right swaying motion, including lifting mandrel type and lifting flange type.

2. Mandrel type output shaft is matched with mass and people, suitable for high precision and high speed material clamping.

3. Flange output can be designed as hollow shaft.

PROJECT	SYMBOL	UNIT	VALUE
Allowable radial load of output shaft	C1	kgf	7
Output shaft allowable axial load	C2	kgf	14
Output shaft allowable torque	Ts	kgf-m	Reference torque table
Input shaft allowable radial load	C3	kgf	100
Input shaft bending moment	C4	kgf	95
Input shaft maximum torque	C5	kgf-m	6
GD2 of input shaft (Note 1)	C6	kgf-m²	1.2 x 10^-2
Repeat positioning accuracy		sec.	±30
Weight		kg	22.0

The GD2 of the input shaft is the value within the stop range。
C1~C5 value is the value when the safety factor = 2 is reached。

*The company reserves the right to modify the drawing, please contact the company for detailed specifications。

PROJECT	SYMBOL	UNIT	VALUE
Allowable radial load of output shaft	C1	kgf	15
Output shaft allowable axial load	C2	kgf	18
Output shaft allowable torque	Ts	kgf-m	Reference torque table
Input shaft allowable radial load	C3	kgf	140
Input shaft bending moment	C4	kgf	190
Input shaft maximum torque	C5	kgf-m	9.5
GD2 of input shaft (Note 1)	C6	kgf-m²	1.7 x 10^-3
Repeat positioning accuracy		sec.	±30
Weight		kg	33.0

The GD2 of the input shaft is the value within the stop range。
C1~C5 value is the value when the safety factor = 2 is reached。

*The company reserves the right to modify the drawing, please contact the company for detailed specifications.

PROJECT	SYMBOL	UNIT	VALUE
Allowable radial load of output shaft	C1	kgf	10.6
Output shaft allowable axial load	C2	kgf	24.9
Output shaft allowable torque	Ts	kgf-m	Reference torque table
Input shaft allowable radial load	C3	kgf	132
Input shaft bending moment	C4	kgf	105
Input shaft maximum torque	C5	kgf-m	10.8
GD2 of input shaft (Note 1)	C6	kgf-m²	1.5 x 10^-3
Repeat positioning accuracy		sec.	±30
Weight		kg	30.0

The GD2 of the input shaft is the value within the stop range。
C1~C5 value is the value when the safety factor = 2 is reached。

*The company reserves the right to modify the drawing, please contact the company for detailed specifications.

Lift-and-sway type

400-762-6288

LINK：